Description of iTunes error and some solutions for Solved

 

- Error 1 firmware bug does not fit the device or version of iTunes is too old to work with this version of Update iTunes to the latest version, if the error persists, siphon firmware again

- Error 2 Firmware error is detected, but can not be used due to the fact that the assembled and packaged properly (usually an error occurs when using custom firmware) Siphon firmware or try another

- Error 4 (or 4), this error can occur under the following conditions: Access to ports 80 or 443 is blocked; Firewall, security software, or other third-party Internet access setup to block access to servers or albert.apple.com phobos.apple.com; ITunes Store server is overloaded.

- Error 5, 6 firmware can not be installed due to damage or download logos, or due to the fact that the device is not entered in the service mode (for example, the firmware is designed to DFU Mode, and you are trying to recover through the Recovery Mode) Input device in DFU Mode, if you do not help - download other firmware

- Error 8 Firmware version is coming to iTunes, but not suitable for the device (for example, it is not for the generation devices) Download the firmware version that corresponds to the model of your device

- Error 9 kernel panic in the device when working with the firmware. There is a cliff or data cable, or incompatibility with the firmware recovery mode selected Try to restore the firmware through mode DFU Mode. Check whether securely attached cable into USB-port and 30-pin connector of the device. Change the cable or port.

- Error 10 is missing or damaged boot LLB low level due to crooked collected custom firmware download other custom firmware or rebuild it yourself

- Error 11 The firmware is not enough number of required files (BBFW). Download other custom firmware or rebuild it yourself

- Error 13 problem USB-cable or 30-pin connector or an attempt to install the beta version of iOS for Windows Change the cable or the USB-port. Disable the BIOS USB 2.0

- Error 14 during the needling was found violating the integrity of the firmware file Disable the firewall and antivirus software, try changing your cable or USB-port, try another firmware

- Error 17 Attempting to upgrade from one to another custom firmware custom firmware Before flashing, enter the device into Recovery Mode mode or DFU Mode

- Error 18 (or -18), this error occurs when the media library on the device is damaged and can not be changed or updated. To resolve this issue, try to update iTunes to the latest version and run the recovery again.
 - Error 19 (or -19), this error occurs when you upgrade iPhone 3G to a later version of the software when iTunes tries to back up the iPhone during synchronization. To resolve this problem, follow these steps:
- Uncheck "Automatically sync when this iPhone is connected" in the tab "Overview" in iTunes.
- Remove the iPhone.
- Reconnect the iPhone.
- Select "Update". 

- Error 20 instead of DFU Mode mode the device is in Recovery Mode Enter the device in DFU Mode

- Error 21 Error in DFU-mode when the device jailbreak Enter DFU Mode via Pwnage Tool, sn0wbreeze or redsn0w


- ITunes error 23 can not find the IMEI or MAC-address hardware device other firmwares If the problem persists, the problem is the nature of the hardware

- Error 26 error with the NOR-memory due to crooked collected firmware download other custom firmware or rebuild it yourself

- Error 27, 29 iTunes loops when trying to restore the firmware upgrade iTunes to version 10

- Hardware failure error 28 30-pin connector will be able to help you only when
- Error 34 Not enough disk space Free hard drive on which you installed iTunes

- Error 35 spoiled right of access to the iTunes folder on the Mac Launch Disk Utility and follow the restoration of rights of access

- Error 37 Low-level loader does not match the model due to an error when building custom firmware download other custom firmware or rebuild it yourself
- Error 39 requires the latest version of iTunes. Update your iTunes.

- Error -39 is not possible to download music from the iTunes Store Update iTunes to the latest version, log out of your account and log in again, turn off the firewall and antivirus

- Error 39, 40, 306, 10054 The problem with access to the activation server, and signing Disable the firewall and antivirus

- Error 48 (or -48), quit iTunes and remove the IPSW-file. Then open iTunes and try to download. Accommodation IPSW-file, see. In the "Rename, move or delete the file iOS (IPSW)» below.

- Error -50 iTunes can not contact the server itunes.apple.com Update iTunes to the latest version, log out of your account and log in again, turn off the firewall and antivirus

- Error 54 Unable to transfer iTunes Store purchases from your device deletes old backups. Deauthorize your computer in iTunes (menu item "Shop") and try again

- Error 414 You have no right to fill in the device content with a rating of 17+ Correct the data on the age of your account in iTunes (menu "View my Shop-account")

- Error 499 This warning is caused by security software.

- Error 609 This warning may appear when you try to get album artwork for songs in your library. To resolve this problem, follow these steps.
-Open The program iTunes.
A sequence of select Store> Exit (after that you get out of your account iTunes Store).
-Close The program iTunes.
-Vnov Run iTunes.
A sequence of select Store> Sign in and log in to your account iTunes Store.
-Try To re-select the songs and choose Advanced> Get Album Artwork.

- Error 1000 This error is often caused by the intervention of security software, the poor quality of the Internet connection, resulting in damage to the IPSW-file, or conflict with other devices connected to the computer via USB.

- Error 1004 Apple servers were unable to send SHSH-hashes for the device to flash Try later

- Error 1008 Your Apple ID contains invalid (in terms of iTunes) Try not to use the characters in the Apple ID that anything other than letters and numbers

- Error 1011, 1012 Modem iPhone / iPad does not respond Try to restart the device. If the error is repeated continuously, then there may be a hardware problem

- Error 1013-1015 iTunes trying to downgrade the modem iPhone / iPad error indicates that flashing completed normally, however, by itself iPhone / iPad after it will not be able to boot. You must use the Kick Device Out of Recovery Utility TinyUmbrella

- Error 1050 activation servers are unavailable Apple Try to activate the device later

- Error 1394 System files are damaged as a result of failure to restore the firmware and jailbreak Jailbreak again
- Error 1403 The firmware file is corrupted. Pump the firmware using iTunes.

- Error 1415-1428 Problems with data transfer on USB-cable Check cable and serviceability USB-ports

- Error 1430, 1432 Change the device does not recognize the cable, USB-port computer. May indicate a hardware problem

- Error 1450 Can not modify the file in your iTunes library Restore permissions on Mac OS X, check the owners and permissions to the folder in Windows

- Error 1479 This error occurs when accessing resources in the Apple update or restore. End the program, turn off the device by USB, reboot the device running iOS, reconnect the device to your computer, then open iTunes and try again update or restore.

- Error 16xx (1601, 1604, 1602, 1611, etc.) means that the program can not verify the firmware. Ways out of the situation - to turn off User Account Control (UAC in Vista and Seven); use the latest version of iTunes; transfer the firmware file to the directory with a simple and short name; download the original firmware from Apple and re-create a custom firmware; Back to USB-port or device correctly translate into DFU.

- Error 1600, 1611 Restore to custom firmware goes through DFU Mode, although it should have been conducted through the Recovery Mode Enter the device in Recovery Mode

- Error 1603, 1604 On the custom firmware is restored nedzheylbreyknutoe device Jailbreak the current firmware. Note: jailbreak utility Spirit and JailbreakMe site is not complete and also leads to errors

- Error 1609 iTunes version is too old to work with the device Update iTunes to the latest version

- Error 1619 iTunes sees the device as normal, but can not work with it in DFU-mode Update iTunes to the latest version

- Error 1644 Other system processes interfere iTunes to work with firmware file Restart your computer, turn off the firewall and antivirus, close all programs running in the background

- Errors 2000-2009 (2001, 2002, 2005, 2006, 2009 and so on. D.) When these errors on a Mac, disconnect all third-party devices, hubs, additional cables, displays, and try to restore the system. When using a computer running Windows, disconnect all USB devices and optional cables, leaving you only connect a keyboard, mouse and the device, and then restart your computer and try again recovery. If this does not resolve the problem, see. The above information to resolve error 1604.

- Error 2001 Mac OS X drivers block access to, update Mac OS X to the latest version

- Access Error 2002 iTunes to the device blocking other system processes Close all other programs, turn off the antivirus, restart your computer

- Error 2003 Damaged USB-port Clean port USB, check contacts, try to connect the device to a different port or computer

- Error 2005 Damaged cable Replace cable

- Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194 and so on. D.) The errors codes are in the range of 3000 generally indicate that iTunes can not connect to the update server (gs .apple.com) through port 80 or 443. This may be caused by outdated or incorrectly configured security software or firewall, installing an older version of iTunes, entry in the hosts, forwards the request sent to the server gs.apple.com, or access to settings Internet via a proxy server. If you are connecting through a proxy server, try to update or restore without a proxy server or use a known good network connection.

- Error 3014 may indicate that before trying to restore the necessary free space on your hard drive.

- Error 3000, 3004, 3999 can not access the server firmware signing Disable the firewall and antivirus

- Error 3001, 5103, -42210 iTunes can not download the video Locate and delete the folder from the disk utility "SC Info"

- Error 3002, 3194 Unable to query the server firmware signing the appropriate hash SHSH. Occurs if you redirect iTunes to Cydia server via the hosts file or utility TinyUmbrella, but the server has no saved hashes for the firmware Disconnect TinyUmbrella or remove from the hosts file line "74.208.105.171 gs.apple.com"

- Error 3123 iTunes can not take video rental deauthorize the computer and log into iTunes again
- Error 3194 indicates that you have not installed the latest version of iTunes.

- Error 3195 adopted SHSH hash damaged Try to start sewing again

- Error -3221 Incorrect permissions on the file in iTunes on the Mac Launch Disk Utility and make the restoration of rights of access

- Error -3259 timed out waiting on the iTunes Store Check your Internet connection

- Error 3200 Indicates a problem with the connection to the network or traffic. If you experience this error, wait an hour or a little more and try again.

- Error 5002 Unable to confirm the payment from the iTunes Store Check the information on your credit card

- Error 8012 error occurs when iTunes can not access the file download. Unplug the antivirus and firewall.

- Error 8008, -50, -5000, -42023 iTunes could not restore the session file upload Clean contents of the folder "iTunes Media / Downloads" folder in iTunes

- Error 8248 iTunes interfere with the normal operation of the old incompatible plugins to delete the set to the iTunes plug-ins until the error no longer appears

- Error 9807 iTunes can not contact the server verify digital signatures disable the firewall and antivirus

- Error 9813 invalid certificate Keychain Clear your cache Safari (menu "Safari-Reset Safari")

- Error -9800, -9812, -9814 error the time of purchase on the iTunes Store on your computer Set the correct date

- Error 9844 is typically caused by incorrect firewall settings. In the process of renovation and restoration of iTunes, you want to connect to resources from Apple. Make sure that the computer and open the following ports have access to the listed server: port 80; port 443; phobos.apple.com, albert.apple.com, gs.apple.com, edgesuite.net, evintl-ocsp.verisign.com, evsecure-ocsp.verisign.com.

- Error 11222 block access to the services of iTunes disable the firewall

- Error 13001 irreversibly damaged file in your iTunes library Remove iTunes folder and file iTunes Library files with the extension itdb

- Error 13014, 13136 Other processes interfere with normal iTunes Restart the computer, turn off the firewall and antivirus, close all programs running in the background

- Error 13019 Error when trying to synchronize your library to your iTunes library Check for the presence of damaged and incompatible files

- Error 20000 iTunes conflicts with Windows graphical user interface included in Windows standard theme

- Error 20000-20008 may indicate a communication failure due to damage to a USB 30-pin cable to the dock connector port USB, outdated drivers or firmware USB or interference caused by other devices USB, connected to your computer, while iTunes does communicate with devices running iOS. Try restarting your computer and perform the test using a different port for connecting USB.

- Error 40265xxxx error occurs during recovery from a backup after installing iOS device. Solved by restoring and setting up as a new device. Before setting up as a new device, save a backup of the device.

- Error 42408, 42404 may occur when you try to login using iTunes 9.0.3. Download iTunes later from the page apple.com/ru/itunes/download/

- Error (0x666D743F) file conflict with each other at startup. Go to Control Panel -> QuickTime tab in the "Audio" tick about Safe mode (waveOut only)

- Error 0xE8000022 irreversibly damaged system files Restore iOS firmware

- Error 0xE8008001 Attempting to install unsigned applications to the device. This 
synchronization error. Necessary in Cydia repository http://cydia.haculo.us/ install AppSync for 3.0, if you have on a device firmware 3.0 or AppSync for 3.1, if you have installed the firmware 3.1 or 3.1.2

- Synchronization error error 0xE8000013 iTunes. It is necessary to repeat the synchronization with iTunes.

- 0xE8000001 error appears in the operating system Windows. Windows users need to restart the service AppleMobileDeviceService.exe.